Special Purpose Racks
Electron Microscopy Sciences 30 Slide Stainless Steel Staining Rack
A variety of inexpensive staining dishes made from molded glass with and without fitted glass and Stainless Steel lids. Removable slide rack with open bottom for rapid filling and draining.
TrippNT Dissolution Vessel Holder
TrippNT's Dissolution Vessel Holder can hold 6 dissolution vessels with widths up to 4 3/8". The corners are open to allow water to flow through and allow carrier to drain. On either side of the holder there are handles cut into the material for easy transportation. This holder is constructed out of white PVC and ships fully assembled.
•White Rectangular Design with (6) 4 3/8" Diameter Openings
•Corners are Open to Allow Water to Flow Through and Allow Carrier to Drain
•Constructed from White PVC
•Holds Dissolution Vessels so they can be Easily Transported
•100% Total Replacement Lifetime Guarantee/Made in USA
Electron Microscopy Sciences Adjustable Coverglass Rack 1 each
This polypropylene rack accommodates a cover-glass in all sizes by simply adjusting the holder to fit the cover glass and then securing it by tightening the reset screws with the hex key. The holder is made from non ferrous material, so it is microwaveable.
The rack accommodates 10 cover glasses, round, square or rectangular, adjusting from 5 mm to 60 mm. Removable handle. Rack comes with two set of holding rods. One set accommodate cover glasses from 5 to 25 mm, and the other set for cover glasses from 5 mm to 60 mm. Rack measures 1-1/2" W x 1-1/2" H (48 x48 mm).
Electron Microscopy Sciences CoolSafe™ Cooling Chamber for multi-tube format
Each Cooling Chamber is a solid aluminum block that surrounds inserted tubes to guarantee sustained hot or cold temperatures.
Research Products International Corp Flipper 4-Way Tube Racks, Assorted Colors (Blue, Green, Orange, Pink, Yellow), 5 per Case
Flipper 4-Way Tube Racks are designed to hold a variety of tube sizes and styles.
Racks can be rotated to any of four positions to accommodate:
- 4-50 ml conical tubes
- 32-12x75 or 1.5 ml tubes
- 12-15 ml conical tubes
- 32-0.5 ml micro-tubes
Autoclavable racks are constructed of durable polypropylene and can be used in water baths and freezers.
Research Products International Corp Floating Foam Tube Rack, Yellow, Holds 24 1.5 - 2.0ml Tubes, 5 per Package
Poly foam floating racks available in three styles for use in water bath applications. Foam racks keep tubes completely submerged. Supplied with optional handles for easy handling.
Electron Microscopy Sciences Wash N'Dry™ Wash N'Dry Cover Slip Rack
Cover slip rack that holds 10 cover slips. Fast and easy cleaning, surface-treating and drying. Holds all slipcover sizes including 18, 22 and 25 mm. One piece polypropylene rack does not require assembly and is chemically and thermally resistant. Autoclavable. Innovative design includes a notch to secure coverslips with a rubber band or loop of monofilament. Fits inside a 100 ml beaker with space underneath for a small stir bar when submerged.
Research Products International Corp Flipper 4-Way Tube Racks, Natural, 3 1/2 x 2 x 7 Inches, 5 per Case
Flipper 4-Way Tube Racks are designed to hold a variety of tube sizes and styles.
Racks can be rotated to any of four positions to accommodate:
- 4-50 ml conical tubes
- 32-12x75 or 1.5 ml tubes
- 12-15 ml conical tubes
- 32-0.5 ml micro-tubes
Autoclavable racks are constructed of durable polypropylene and can be used in water baths and freezers.
Perkin Elmer US LLC Quartz Hydride Gas-Liquid Separator for hydrideFAST
This quartz hydride gas-liquid separator is used with all hydrideFAST autosampler systems.
Sigma Aldrich Fine Chemicals Biosciences Polypropylene NMR tube rac1EA
Polypropylene rack is steam autoclavable at 121C (250f)Dimensions 21 cm x 11 cm x 22 cm H (8 3/8 in. x 4 1/2 in. x 8 3/4 in.)Rugged and made specifically to support and safely store Nuclear Magnetic Resonance tubesUpper deck has holes lower deck has hemispherical wells to protect tipHandle in end plates for easy transportTube size 3 or 5 mm O.D. x 178 mm longHoles 72
New England Biolabs, Inc. 6-Tube Magnetic Separation Rack – 6 tubes
The 6-Tube Magnetic Separation Rack is designed to be used for small-scale separations using magnetic particles.
Electron Microscopy Sciences 30-Slide Stainless Steel Rack 1 each
This 30-slide rack is made from non-tarnishing stainless steel and it is resistant to most staining solutions. The handle is permanently attached but it is swing-able to permitting for closure of the dish and easy insertion and removal of the slides.
CELLTREAT Scientific Products 15mL Centrifuge Tube - Paperboard Rack, Sterile
CELLTREAT Scientific Products 15mL Centrifuge Tube in Paperboard Rack. Graduations are printed in bold, easy-to-read black ink and are accurate to +/-2%. Large white marking area provides excellent contrast for identification. Easy to write on flat surface polyethylene (HDPE) caps feature integrated leak-proof seal. Tubes include graduations molded into the conical bottom, ideal for pellet viewing and small volume quantification. Convenient zip-closure bag is a practical alternative to folding and taping opened bags. Paperboard rack is a recyclable, fold-flat alternative to bulky foam racks. RNase/DNase free and non-pyrogenic. Max Force (RCF)g 12000. Every case is printed with the lot number for quality traceability. Packaged sterile, 25/paperboard rack with 2 racks/bag, 500/case.